079 27702711

+91 9714854011

Product Catalogues

4K 10.2Gbps HDMI USB KVM Extender via One CAT6/7 Cable

  • Description
  • Sepcification
  • Download
  • Buy

INTRODUCTION

        • The 4K 10.2Gbps HDMI USB KVM Extender via CAT6/7 or Fiber provides remote KVM (USB keyboard, USB mouse and 4Kx2K 30Hz UHD HDMI monitor) access to a USB computer up to 328 feet (100 meters) away via CAT6/6a/7 cable, 6.21 miles (10 km) via simplex LC singlemode fiber optic cable, or 984 feet (300 m) via simplex LC multimode fiber optic cable.
        • Each KVM extender consists of a local unit that connects to a computer, and a remote unit that connects to an HDMI monitor, bi-directional 3.5mm stereo audio speakers and microphone, RS232, and up to four USB devices (keyboard, mouse, flash drive, HDD, or touchscreen display).
        • Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @30Hz YUV 4:4:4, HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
        • Signal transmission via one CAT6/6a/7 cable or one single-strand singlemode/multimode LC fiber optic cable.

      Using CAT6/6a/7 cable:

          • Extend a 4Kx2K signal up to 328 feet (100 meters).
          • Extend a 1080p or 1920x1200 signal up to 492 feet (150 meters).
          • Use with a Gigabit switch to extend a total distance of 656 feet (200 meters) between the transmitter and receiver – the transmitter and receiver can each be extended 328 feet (100 meters) from the switch.
          • Using singlemode 9-micron cable, extend to 6.21 miles (10 km).
          • Using multimode 50-micron cable, extend to 984 feet (300 meters).

      HDMI features supported:


          • HDMI 1.4
          • 36-bit Deep Color
          • RGB, YCbCr 4:4:4, YCbCr 4:2:2
          • Dolby, DTS, Stereo, and LPCM
          • Bandwidth up to 340 MHz (10.2 Gbps)
          • HDCP 1.4 compliant.
          • Four USB 2.0 ports for keyboard, mouse, flash drive, HDD or touchscreen display.
          • Keyboard and mouse are hot-pluggable.
          • Supports Plug-and-Play specification.
          • Using an unmanaged Gigabit network switch, extend up to 32 pairs in Point-to-Point connections.
          • Use the DIP switch on the transmitter and receiver to specify the ID for the unit.
          • Transmitter and receiver units with the same ID will connect to each other. (Only Point-to-Point connections are supported.)
          • Supports full-duplex RS232 up to 115200 baud.
          • EDID pass-through for the support of any HDMI display device.
          • Mounting brackets included for easy surface/wall mounting

      TECHNICAL 

      Local Unit

          • Compatible with a USB computer with Ultra-HD HDMI output.
          • Multiplatform support: Windows 7/8/10, Windows Server 2008/2012/2016/2019, Linux, and MAC OS 10/11.
          • One female HDMI connector.
          • One female USB Type B connector.
          • Two female 3.5mm stereo jacks for audio out and mic in.
          • 3-pin screw terminal for RS232.
          • Support full-duplex RS232 up to 115200 baud.
          • One female RJ45 port for sending/receiving video, audio, USB, and RS232 signals.
          • One simplex female LC fiber optic port for sending video, audio, USB, and RS232 signals.
          • DIP switch for specifying unit ID.
          • Supports HDCP 1.4

      Remote Unit

          • One female HDMI connector.
          • Four female USB 2.0 Type A connectors for keyboard, mouse, flash drive, HDD, or touchscreen display.
          • Two female 3.5mm stereo jacks for audio out and mic in.
          • 3-pin screw terminal for RS232.
          • Support full-duplex RS232 up to 115200 baud.
          • One female RJ45 port for sending/receiving video, audio, USB, and RS232 signals.
          • One simplex female LC fiber optic port for sending/receiving video, audio, USB, and RS232 signals.
          • DIP switch for specifying unit ID.
          • Supported video resolutions:
          • Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @30Hz YUV 4:4:4
          • HDTV resolutions to 1080p
          • Up to 1920x1200 (WUXGA)
          • Supports embedded digital audio through HDMI compatible TVs or audio receivers.

      Power

      Local and remote unit:

        Input: 100 to 240 VAC at 50 or 60 Hz via AC adapter (included).

        Output: 12VDC, 2A

        Max Distance

              • Using CAT6/6a/7 cable:
              • Extend a 4Kx2K signal up to 328 feet (100 meters).
              • Extend a 1080p or 1920x1200 signal up to 492 feet (150 meters).
              • Using singlemode 9-micron cable, extend to 6.21 miles (10 km).
              • Using multimode 50-micron cable, extend to 984 feet (300 meters).

          Cables

              • Interface cables between the source/display and the transmitter/receiver are required for proper operation.
              • Supports HDMI cable lengths to 20 feet for 4Kx2K resolutions and 50 feet for 1080p.
              • Longer cables can be used provided they have a built-in video equalizer (also known as "active HDMI cables").
              • Use HD-xx-MM cable to connect an HDMI source or display.
              • HD-3/6/10/15/20-MM supports resolutions to 4K@30Hz.
              • HD-30/50-MM supports resolutions to 1080p.
              • Use HD-ACT-xx-MM 4K HDMI Active Cables to connect an HDMI source or display up to 100 feet.
              • Use DVI-HD-xx-MM to connect DVI source or display.
              • Does not support 4Kx2K resolutions.
              • Use a USB2-AB-x-5T male USB Type A to male USB Type B interface cable to connect the USB computer to the transmitter.
              • Use CAT6/6a/7 cable terminated with standard RJ45 connectors to extend the receiver from the transmitter.
              • Extend a 4Kx2K signal up to 328 feet (100 meters).
              • Extend a 1080p or 1920x1200 signal up to 492 feet (150 meters).
              • Use a simplex singlemode LC 9-micron fiber optic cable to extend the receiver from the transmitter up to 6.21 miles (10 km).
              • Use a simplex multimode LC 50-micron fiber optic cable to extend the receiver from the transmitter up to 984 feet (300 meters).
              • Cables not included.

          Dimensions

          WxDxH (in): 6.32x3.82x1.1 (161x97x28 mm)

          Environmental

          Operating temperature: 32 to 131°F (0 to 55°C).

          Storage temperature: -4 to 185°F (-20 to 85°C).

          Operating/storage relative humidity: 5 to 90% non-condensing RH.

          Regulatory Approval

          CE, FCC, RoHS

          Warranty

          2 Years



          HD-3-MM 4K@60Hz, 1080p@120Hz (Length- 3 feet)
          HD-6-MM 4K@60Hz, 1080p@120Hz (Length- 6 feet)
          HD-10-MM 4K@60Hz, 1080p@120Hz (Length- 10 feet)
          HD-15-MM 4K@60Hz, 1080p@120Hz (Length- 15 feet)
          HD-ACT-20-MM 4K@60Hz (Length- 20 feet)
          HD-ACT-25-MM 4K@60Hz (Length- 25 feet)
          HD-ACT-30-MM 4K@60Hz (Length- 30 feet )
          HD-ACT-40-MM 4K@60Hz (Length- 40 feet)
          HD-ACT-50-MM 4K@60Hz (Length- 50 feet)
          HD-ACT-60-MM 4K@60Hz (Length-60 feet)
          HD-ACT-75-MM 4K@30Hz (Length- 75 feet)
          HD-ACT-100-MM 4K@30Hz (Length- 100 feet)
          DVI-HD-1M-MM 1080p@60Hz (Length- 1 meter)
          DVI-HD-2M-MM 1080p@60Hz (Length- 2 meter)
          DVI-HD-3M-MM 1080p@60Hz (Length- 3 meter)
          DVI-HD-5M-MM 1080p@60Hz (Length- 5 meter)
          USB2-AB-0-5M-5T 0.5 meters (1.64 ft)
          USB2-AB-3-5T 3 feet
          USB2-AB-6-5T 6 feet
          USB2-AB-10-5T 10 feet
          USB2-AB-5M-5T 5 meters (16.4 ft)
          SA-3-MM 3 ft
          SA-6-MM 6 ft
          SA-10-MM 10 ft
          SA-15-MM 15 ft
          SA-25-MM 25 ft
          SA-35-MM 35 ft
          SA-50-MM 50 ft
          SA-100-MM 100 ft
          FIBER-S-LCLC-50G-50M-PLNM 50 m
          ST-C6FOUSB4K-LC 4K 10.2Gbps HDMI USB KVM Extender via CATx or Fiber