079 27702711

+91 9714854011

Product Catalogues

Low-Cost HDMI Quad Screen Splitter/Multiviewer/Extender

Low-Cost HDMI Quad Screen Splitter/Multiviewer/Extender

Model No : SPLITMUX-C5HDR-4LC-CLR

Weight In KG :2.04116

Weight In LB :4.5



Request for Price
  • Description
  • Sepcification
  • Download
  • Buy

INTRODUCTION

      • The Low-Cost HDMI Quad Screen Multiviewer allows you to simultaneously display real-time HDMI/DVI video from four different sources on a single monitor. It is capable of displaying the video sources in quad, PiP, or full screen mode. The audio/video output can be extended up to 250 feet away via a single CAT6/6a/7 cable.
      • Quad, Picture in Picture, and Full Screen display modes.
      • Independent video in to video out resolution.

    Supported resolutions:

    Input: HTDV resolutions to 1080p and computer resolutions to 1920x1200.

    Output: 1080p, 1080i, 720p, 1024x768, 1360x768.

      HDMI features supported:

      Inputs: 24-, 30-, and 36-bit xvYCC, sRGB, and YCbCr.

      Outputs: 24- and 30-bit sRGB.

      Four-channel non-mixing stereo with 16-, 20-, or 24-bit uncompressed PCM audio.

      Bandwidth up to 165 MHz.

      Inputs: 2.25 Gbps

      Output: 2.0625 Gbps

                    • Fluid, real-time video performance with 60 frames per second (fps) in all four quadrants.
                    • Switch audio independently of video from connected HDMI sources in Quad mode.
                    • Any DVI source or display can be connected by using the DVI-HD-xx-MM cable (not included).
                    • Use DVI-HD-CNVTR DVI + Audio to HDMI Converters to pass and independently switch audio signals to the multiviewer.
                    • Control the multiviewer through front panel buttons, IR remote, or Graphical User Interface (GUI) via RS232.
                    • Bi-directional IR control from multiviewer and remote unit locations.
                    • Cascade multiviewers to display video from any number of video sources on one screen.
                    • Each unit in the cascade must be configured and controlled individually.
                    • Cascaded outputs can be extended using the remote unit as long as the combined total CAT6/6a/7 cable length between all levels of the cascade does not exceed 250 feet.
                    • Compatible with SPLITMUX-HD-4RT for cascade configurations.
                    • Adjust output video brightness, contrast, color, and sharpness.
                    • Supports simultaneous local and remote HDMI output.
                    • Features coax SPDIF audio outputs at the multiviewer and receiver.
                    • Built-in default EDID table.
                    • Supported output resolutions can be selected.
                    • ARC (Audio Return Channel) support at the receiver unit via coax SPDIF output for speakers.
                    • Turn ARC on to play audio from an HDTV with ARC support to the connected speakers.
                    • Turn ARC off to play audio from the multiviewer source to the connected speakers.

                Note: This device does not support HDCP.

                TECHNICAL 


                MULTIVIEWER

                Inputs
                    • Four female HDMI connectors.
                    • One 3.5mm port for IR receiver.
                    • One RS232 port for Graphical User Interface (GUI) control.
                    • Supports digital HDMI devices, such as DVD/Blu-ray players, satellite receivers, and HDTV tuners.
                    • A DVI source can be connected by using the DVI-HD-xx-MM cable (not included). The cable does not pass audio to the multiviewer.
                    • Use a video + audio to HDMI video converter to pass embedded HDMI audio into the multiviewer (see Compatible NTI Products below).

                Outputs
                    • One female HDMI connector for local display.
                    • One RJ45 connector for CATx cable to remote unit.
                    • One coax connector for local SPDIF audio.
                    • Four 3.5mm ports for IR emitters.
                    • Output resolutions: 1080p, 1080i, 720p, 1024x768, 1360x768.
                    • A DVI display can be connected by using the DVI-HD-xx-MM cable (not included). The cable does not pass audio to the display.
                    • Use a video + audio to HDMI video converter to pass embedded HDMI audio into the multiviewer (see Compatible NTI Products below).

                Power

                100 to 240 VAC at 50 or 60 Hz via AC adapter.

                Power consumption: 10W.

                Dimensions

                WxDxH (in): 10.53x4.56x1.29 (267x116x33 mm)

                Environmental

                Operating temperature: 32 to 104°F (0 to 40°C).

                Storage temperature: -4 to 140°F (-20 to 60°C).

                Operating and storage relative humidity: 20 to 90% non-condensing RH.

                Regulatory Approvals

                CE, FCC, RoHS

                Package Includes
                    • One HDMI Multiviewer
                    • One remote unit
                    • One 12V, 2.5A power supply
                    • One 5V, 1A power supply
                    • One IR remote
                    • Five IR emitters
                    • Two IR receivers
                    • One 4.6 ft (1.4 m) RS232 cable
                    • Wall mount brackets with screws
                    • User manual

                Compatible NTI Products
                    • Combine NTI's multiviewers and video converters for cost-effective display configurations.
                    • DVI-D to HDMI Single Link Interface Cable (DVI-HD-xx-MM).
                    • The cable does not pass audio to the multiviewer.
                    • HDMI Quad Screen Multiviewer (SPLITMUX-HD-4RT)
                    • DVI + Digital Audio to HDMI Converter
                      (DVI-HD-CNVTR)
                    • Composite Video + Audio to HDMI Converter
                      (CVA-HD-LC)
                    • VGA + Audio to HDMI Converter Cable
                      (VGAA-HD-ULC)
                    • Note:This device does not support HDCP.

                REMOTE UNIT 

                Inputs

                One RJ45 connector for CATx cable to multiviewer.

                One 3.5mm port for IR receiver.

                Outputs
                    • One female HDMI connector for remote display.
                    • One coax connector for remote SPDIF audio.
                    • Supports ARC (Audio Return Channel)
                    • One 3.5mm port for IR emitter.
                    • Supports crisp and clear HDTV resolutions to 1080p and computer resolutions to 1920x1200.
                    • A DVI display can be connected by using the DVI-HD-xx-MM cable (not included). The cable does not pass audio to the display.
                    • Use a video + audio to HDMI video converter to pass embedded HDMI audio into the multiviewer (see Compatible NTI Products below).

                Power

                100 to 240 VAC at 50 or 60 Hz via AC adapter.

                Dimensions

                WxDxH (in): 4.02x2.60x1.02 (102x66x26 mm)

                Environmental

                Operating temperature: 32 to 104°F (0 to 40°C).

                Storage temperature: -4 to 140°F (-20 to 60°C).

                Operating and storage relative humidity: 20 to 90% non-condensing RH.

                Regulatory Approvals

                CE, FCC, RoHS


                Distances & Resolutions for CAT5/5e/6/6a/7 Cables

                Cable
                		Distance
                		Max Std Resolution
                CAT5 Stranded STP
                		100 ft
                		1080i/60Hz

                		100 ft
                		720p/60Hz
                CAT5 Solid STP
                		50 ft
                		1080p/60Hz

                		100 ft
                		1080i/60Hz

                		100 ft
                		720p/60Hz
                CAT5e Solid UTP/STP
                		175 ft
                		1080i/60Hz

                		175 ft
                		720p/60Hz
                CAT5e Stranded UTP/STP
                		90 ft
                		1080p/60Hz
                CAT6 Stranded UTP
                		90 ft
                		1080p/60Hz
                CAT6 Solid UTP
                		125 ft
                		1080p/60Hz

                		250 ft
                		1080p/60Hz

                		250 ft
                		720p/60Hz
                CAT6a/7 Solid STP
                		250 ft
                		1080p/60Hz



                SPLITMUX-C5HDR-4LC-CLR HDMI Quad Screen Splitter/Multiviewer/Extender
                HD-3-MM 4K@60Hz, 1080p@120Hz (Length- 3 feet)
                HD-6-MM 4K@60Hz, 1080p@120Hz (Length- 6 feet)
                HD-10-MM 4K@60Hz, 1080p@120Hz (Length- 10 feet)
                HD-15-MM 4K@60Hz, 1080p@120Hz (Length- 15 feet)
                HD-25-MM 1080p@60Hz (Length- 25 feet)
                HD-30-MM 1080p@60Hz (Length- 30 feet)
                HD-50-MM 1080p@60Hz (Length- 50 feet)
                DVI-HD-1M-MM 1080p@60Hz (Length- 1 meter)
                DVI-HD-2M-MM 1080p@60Hz (Length- 2 meter)
                DVI-HD-3M-MM 1080p@60Hz (Length- 3 meter)
                DVI-HD-5M-MM 1080p@60Hz (Length- 5 meter)
                DVI-HD-CNVTR DVI to HDMI Converter
                CVA-HD-LC Low-Cost Composite Video + Audio to HDMI Converter
                VGAA-HD-ULC VGA + Audio to HDMI Converter Cable