079 27702711

+91 9714854011

Product Catalogues

Industrial IoT Remote I/O

Industrial IoT Remote I/O

Model No : IO5202

Weight In KG :1

Weight In LB :2.20462



Request for Price
  • Description
  • Sepcification
  • Download
  • Buy

INTRODUCTION

      • As an IIoT I/O module, ATOP’s IO5202 Series is a compact solution for connecting digital and analog devices and sensors, enabling you to monitor, acquire and process data from remote sensors and control digital and analog outputs. The IO5202 Series is a cost-effective solution for integrating existing applications into an IIoT framework, such as automated manufacturing, building management and control, and agricultural and irrigation systems.
      • Offering plug-and-play simplicity, the IO5202 Series supports numerous protocols, including Modbus TCP/RTU/ASCII, MQTT, MQTT over TLS and SNMP. Using the intelligent processing and publishing features of the IO5202 Series, data can be polled, logged, or even automatically pushed when I/O statuses change.
      • Supporting numerous configurations options to support various types of digital I/O, analog I/O, and relay scenarios, the IO5202 Series has been designed for demanding industrial applications that require compact solutions while delivering high network performance. Supporting a wide operating temperature range of -40ºC~70ºC* and Industrial EMC protection, the IO5202 Series can perform under a variety of environmental conditions, such as power input voltage, shock, drop and vibration.

     


    APPLICATION

    The IO5202 Series supports Modbus TCP/RTU/ASCII, MQTT, MQTT over TLS and SNMP. Using the intelligent processing and publishing features, data can be polled, logged, or even automatically pushed when I/O statuses change. Also, data can be pushed to connect and interact with a public or private cloud servers.


    TECHNICAL 

    ETHERNET
    		STANDARD
    Compliance
    		IEEE802.3 for 10BASE-T
    IEEE802.3u for 100BASE-T(X)
    Number of ports
    		2x RJ45
    Transmission Rate
    		10/100 Mbps
    Auto MDI/MDI-X
    		Yes
    SERIAL
    VALUE
    Mode
    		RS-232/ RS-422 / RS-485 (2-wire and 4-wire)
    Number of ports
    		1x
    Connector
    		5-pin 3.81mm Terminal Block (-TB models) or 9-pin D-Sub9 (-DB models)
    Baud rate
    		1200~234,000 bps
    Data bits
    		7,8 software selectable
    Stop bits
    		1,2 software selectable
    Auto-detection
    		RS-485 auto-detection by hardware
    POWER
    		VALUE
    Input Voltage
    		12-48VDC
    Input Current
    		0.6~0.2A
    Max. Power Consumption
    		9.6W
    Reverse polarity protection
    		Present
    Connector
    		5.08mm 3-Pin Lockable Terminal Block
    LED
    		VALUE
    Indicators
    		PWR, RUN, RJ45 Act/Link, COM1 Tx, COM1 Rx
    SOFTWARE FEATURES
    		VALUE
    Protocols
    		TCP, IPv4, UDP, DHCP Client/Server, HTTP, HTTPS, NTP client, Telnet, ARP,
    SNMPv1,v2c,v3, serial console(on-board connector), MQTT, MQTT Security over
    TLS, SMTP/ SMTP with TLS
    PHYSICAL CHARACTERISTICS
    		VALUE
    Housing
    		IP30 protection according to EN 60529
    Material
    		SPCC
    Dimension (W x H x D)
    		45.3 x 89.6 x 110 mm
    Weight
    		350g
    Installation
    		DIN-rail or wall-mount (optional)
    ENVIRONMENTAL LIMITS
    		VALUE
    Operating Temperature
    		-40~+70ºC (-40~+158ºF)
    Storage Temperature
    		-40~+85ºC (-40~+185ºF)
    Ambient Relative Humidity
    		5~+95% RH (non-condensing)
    DIGITAL INPUTS
    		VALUE
    Input Type
    		Single status (wet or dry contact) or counter
    Dry contact
    		Logic 1: short to GND, Logic 0: open
    Wet contact
    		Logic 1: 0 to 3 VDC, Logic 0: 10 to 30 VDC
    Counter Frequency
    		250 Hz
    Isolation
    		3K Vrms
    DIGITAL OUTPUTS
    		VALUE
    Output Type
    		Output or Pulse output
    Nominal Voltage
    		30 VDC
    Current Rating
    		max 500 mA totally
    Over-voltage Protection
    		45 VDC
    Over-current Protection
    		2.6A
    Over-temperature shutdown
    		175ºC
    Isolation
    		3K Vrms
    RELAY OUTPUTS
    		VALUE
    Form
    		Form A power relay
    Isolation resistance
    		1G Ω @500VDC
    Isolation between contacts
    		3K Vrms
    ANALOG INPUTS
    		VALUE
    Current contact rating
    		Voltage/Current Software Selectable
    Input Range
    		Voltage: ±60m VDC, ±500m VDC, ±1 VDC, ±5 VDC, ±10 VDC
    Current Range
    		Current: 4 to 20 mA
    Resolution
    		16 bits
    Accuracy
    		±0.1% FSR (Voltage) @25ºC
    ±0.2% FSR (Current) @25ºC
    Sampling Rate
    		> 10 samples/sec (per channel)
    Isolation
    		3k VDC or 2k Vrms
    ANALOG OUTPUTS
    		VALUE
    Output Type
    		Voltage/Current Software Selectable
    Voltage Range
    		Voltage: ±10 VDC
    Current Range
    		Current: 4 to 20 mA
    Resolution
    		16 bits
    Accuracy
    		±0.1% FSR @ 25 ºC
    Load Resistor
    		Internal resistor, 500Ω