Modbus Gateway supports the four most commonly used communication standards,
RS-232/485/422, and Ethernet. The ease-of-use configuration utility provided
with Modbus Gateway can quickly select the hardware interface, and easily
switch to the existing communication infrastructure. You could set it up via
Web Browser, Serial Console, Telnet Console, Windows Utility or through the LCM
display in front of the device. Industrial EMC protection makes MB5916 ready
for every mission.
Advanced embedded security
MB5916 embeds IPsec VPN Encryption, that allows you to tunnel your data
securely throught the internet and prevent unauthorized control of your Serial
Devices by malicious people.
Switching between Modbus Protocols
Modbus Gateway supports the standard Modbus protocol and is capable of
converting any Modbus protocols between Modbus TCP, Modbus RTU, and Modbus
ASCII for all supported hardware interfaces. All of this, in bidirectional
mode: Ethernet and Serial ends can selected to be either master or slave
Modbus ID Routing
Modbus Gateway supports various types of hardware communication interfaces,
Modbus protocol conversion, and Modbus ID routing. Therefore the Modbus Gateway
can integrate your existing and complex Modbus
hardware configuration into a simple network that can be easily managed.
IPv4, ICMP, TCP, UDP, DHCP Client, SNMPv1,v2c,v3, HTTP, HTTPS, Telnet, RFC2217, Security through IPsec peer-to-peer or peer-to-side VPN with up to 37.9Mbps VPN throughput, PPTP, and SMTP/TLS