079 27702711

+91 9714854011

Product Catalogues

Compact 2-Port Industrial Serial Device Server, Field-Mount

Compact 2-Port Industrial Serial Device Server, Field-Mount

Model No : MB5202

Weight In KG :0.200

Weight In LB :0.44092



Request for Price
  • Description
  • Sepcification
  • Download
  • Buy

INTRODUCTION

Diverse Hardware Infrastructure
Modbus Gateway supports the four most commonly used communication standards, RS-232/485/422, and Ethernet. The ease-of-use configuration utility provided with Modbus Gateway can quickly select the hardware interface , and easily switch to the existing communication infrastructure. Industrial EMC protection and wide temperature operation capability make MB5202 ready for every mission.


Switching between Modbus Protocols
Modbus Gateway supports the standard Modbus protocol and is capable of converting any Modbus protocols between Modbus TCP, Modbus RTU, and Modbus ASCII for all supported hardware interfaces.


Modbus ID Routing
Modbus Gateway supports various types of hardware communication interfaces, Modbus protocol conversion, and Modbus ID routing. Therefore the Modbus Gateway can integrate your existing and complex Modbus hardware configuration into a simple network that can be easily managed.

 

INTRODUCTION

NETWORK INTERFACE
Ethernet Port
1x 10/100BASE-T(X) RJ-45 or 1x100BASE-FX SFP Slot
Compliance
IEEE 802.3 for 10BASE-T
IEEE 802.3u for 100BASE-T(X) and 100BASE-FX
SERIAL INTERFACE
Connector
9-Pin D-Sub9 connector(Male, -DB version) or 5-Pin Terminal block (-TB version)
Mode
1x RS-232(Full-function DB9)/RS-485(2 and 4 wire)/RS-422, software selectable
1x RS-232/RS-485(2 and 4 wire)/RS-422, software selectable
Ports
2
Baud Rate
1200~230,400 bps
Flow Control
None, Xon/Xoff, RTS/CTS (RS-232 only)
Data Bits
7, 8 software selectable
Stop Bits
1, 2 software selectable
Parity
None, Odd, Even, Space, Mark
SOFTWARE
Protocols
TCP, IPv4, UDP, DHCP Client, HTTP, HTTPS, Telnet, ARP, SNMPv1,v2c,v3
Configuration
Atop Management Utility, Web UI, Telnet, Serial Console
VirtualCOM
Windows/Linux redirection software
Modbus
TCP/RTU/ASCII
TCP Client
Single destination or VirtualCOM
TCP Server
4 Connections; VirtualCOM or reverse Telnet
UDP
Up to 4 Ranges IP
POWER
Input Voltage
3-Pin 5.08mm Terminal Block: 9-30VDC; DC Lockable Jack 5VDC
Isolation
3kV (-Sis versions only)
Power Redundancy
Yes
Power Consumption
<3W
Connector
3-Pin 5.08mm Lockable Terminal Block and DC Jack for redundancy
Reverse Polarity Protection
Yes 
PHYSICAL CHARACTERISTICS
Dimension (W x H x D)
75 mm x 85 mm x 28 mm (without wall-mount part)
SE5202-TB/SE5202-Sis: 74.5 x 108.2 x27.5mm (with wall-mount part)
SE5202-DB: 80.3 x 108.2 x27.5mm (with wall-mount part and DB9 connector)
SE5202-SFP-TB: 76.6 x 108.2 x 27.5mm (with wall-mount and SFP)
SE5202-SFP-DB: 81.4 x 108.2 x 27.5mm (with wall-mount SFP and DB9) 
Weight
200g
Installation
Wall-Mount or DIN-Rail (optional kit)
Reset Button
Yes
ENVIRONMENTAL LIMITS
Operating Temperature
-40°C ~ 70°C (-4°F ~ 158°F)
Storage Temperature
-40°C~85°C (-40°F~185°F)
Ambient Relative Humidity
5%~95%, 55°C (Non-condensing)



MB5202-DB 2-Port Modbus TCP/RTU Gateway, Industrial EMC, RS-232/422/485, DB9(M)
MB5202-TB 2-Port Entry-Level Modbus Gateway, RS-232/422/485, Terminal block
MB5202-SiS 2-Port Entry-Level Modbus Gateway, RS-232/422/485, 2kV Isolation, Terminal block
MB5202-SFP-DB 1-Port Entry-Level Modbus Gateway, RS-232/422/485, Terminal block
MB5202-SFP-TB 1-Port Entry-Level Modbus Gateway, RS-232/422/485, DB9(M)