079 27702711

+91 9714854011

Product Catalogues

4-Port Industrial Secure Wide-Temperature Serial Device Server

4-Port Industrial Secure Wide-Temperature Serial Device Server

Model No : SE5904D

Weight In KG :1

Weight In LB :2.20462



Request for Price
  • Description
  • Sepcification
  • Download
  • Buy

INTRODUCTION

Make Serial Devices Ready to the Network
The Industrial Serial Device Server SE5904D is a cost effective gateway for Ethernet (TCP/IP) and serial signal communications; allowing almost any serial device to be connected to a new or existing Ethernet network. By encapsulating serial data and transporting it over Ethernet, SE5904D offers full-duplex and bi-directional data seamlessly between the four serial ports and the Ethernet network, through 2x 10/100 Ethernet ports or 2x 100/1000 SFP Fiber slots.


Advanced embedded security
SE5904D embeds OpenVPN and IPsec VPN, that allows you to tunnel your data securely throught the internet and prevent unauthorized control of your Serial Devices by malicious people. The integrated Rapid Spanning Tree Protocol (RSTP), allows you to add a backup Ethernet link in the event the primary one fails.


Easy to Use
Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web Browser, Serial Console, or our Windows Utility. Packed in a rugged metal housing for wall or DIN-Rail mount with redundant 12-48 VDC wide range power input and one relay output, SE5904D is ideal for almost any industrial and manufacturing automation process. Atop Virtual COM software provides a virtual environment for applications when accessing SE5904D through TCP.


Specially Designed for Automation Fields and Harsh Environments
In industrial and manufacturing automation fields, SE5904D is used as a field device to connect the Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, and much more. Its design protects it from very harsh EMC and environmental conditions, making it a cost-effective choice for advanced applications.

Rugged and flexible for advanced developments
SE5904D embeds high EMC protection, wide temperature operation, programming and installation flexibility in one device. PoE versions can be powered through Power-over-Ethernet (PoE 802.3af), without additional cabling and power supply. SDK versions allow you to make use of the powerful hardware and develop your own applications on top of Atop’s reliable SDK.

 

TECHNICAL 

NETWORK INTERFACE
Speed
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseT(X)
IEEE 802.3u for 100Base-X (SFP version only)
IEEE 802.3z for 1000Base-X (SFP version only)
PoE standard supported
IEEE 802.3 af (-PoE version only)
LAN Mode
Dual Subnets or Network Redundancy
Connector ports
2x 10/100BASE-T(X) RJ-45 or
2x 100/1000 Base-X SFP Slots (SFP version)
SERIAL INTERFACE
Connector
1x2 5 pin 3.81mm Terminal Block, or D-sub9 connector
Mode
RS-232/422/485, software selectable
Ports
4
Baud Rate
1,200~921,600 bps
Parity
None, Odd, Even
Data Bits
7, 8 software selectable
Stop Bits
1, 2 software selectable
Isolation
3 KV
OTHER INTERFACES
USB Ports
1
Speed
USB 2.0
Connector
USB A Type

SOFTWARE
Protocols
IPv4, ICMP, TCP, UDP, DHCP Client, SNMPv1,v2c,v3, HTTP, HTTPS, Telnet, SMTP/TLS, RFC2217, 802.1D-2004 RSTP, Security through OpenVPN (client/server) or IPsec (host-to-host or host-to-side) with up to 37.9Mbps VPN throughput, and PPTP
Configuration
Atop Management Utility, Web UI, Telnet, Serial Console
VirtualCOM
Windows/Linux redirection software
Link Modes - TCP Client
Single destination or VirtualCOM
Link Modes - TCP Server
4 Connections; VirtualCOM or reverse Telnet
Link Modes - UDP
Up to 4 Ranges IP
POWER
Input Voltage
Dual 12 - 48VDC (non-PoE Models); or through Ethernet Cable (PoE versions)
Input Current (@ 12VDC)
0.65 A @ 12 VDC
Power Consumption
Approximately 8 W (Max)
Connector
7-Pin 5.08mm Lockable Terminal Block
Power Redundancy
Yes
Reverse Polarity Protection
Yes 
Relay Output
1A @ 30 VDC (normal open)
PHYSICAL CHARACTERISTICS
Housing
IP30 SPCC housing
Dimension (W x H x D)
55 x 145 x 113 mm
Weight
1,000g
Installation
DIN-Rail , Wall mount (optional kit)
Reset Button
Yes
ENVIRONMENTAL LIMITS
Operating Temperature
-40°C~85°C (-40°F~185°F)
Storage Temperature
-40°C~85°C (-40°F~185°F)
Ambient Relative Humidity
5%~95%, 55°C (Non-condensing)






SE5904D-4P-DB Ind. 4-Port Serial Device Server, 10/100BASET(X), DB9
SE5904D-4P-TB Ind. 4-Port Serial Device Server, 10/100BASET(X), TB5
SE5904D-4P-Sis Ind. 4-Port Ser. Dev. Serv,10/100BASET(X), 3kV Isolated
SE5904D-4P-PoE-DB Ind. 4-Port Ser. Dev. Serv, 10/100BASET(X)with PoE, DB9
SE5904D-4P-PoE-TB Ind. 4-Port Ser. Dev. Serv, 10/100BASET(X)with PoE, TB5
SE5904D-4P-PoE-Sis Ind. 4-Port Ser. Dev. Serv, RJ45, PoE, 3kV Isolated
SE5904D-4P-G-DB-SFP Ind. 4-Port Ser. Device Server, 100/1000BASEX SFF, DB9
SE5904D-4P-G-TB-SFP Ind. 4-Port Serial Device Server, 100/1000BASEX SFP, TB5
SE5904D-4P-G-Sis-SFP Ind. 4-Port Serial Serv,100/1000BASEX SFP,3kV Isolated