INTRODUCTION

Providing connectivity for the Internet of Things

SE5901B, ATOP’s Industrial Serial to Ethernet and Cellular Gateway/Router is a high-performance, cost effective gateway for serial signal communications; allowing almost any serial device to be connected to Ethernet network and providing connectivity to the world and at the same time protecting your network from intrusions. Its powerful CPU provides up to 37.9Mbps* software-assisted AES encryption for protecting your data flow through the Internet with a secure IPsec VPN tunnel.

Advanced features available

Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web Browser, or our Windows Utility. ATOP Virtual COM software provides a virtual environment for applications when accessing SE5901B through TCP. A dedicated I/O version provides 2 Digital Inputs and 2 Digital Outputs, GPS version provides Global positioning system geolocation and, specifically for the Internet of Things, a “B” version provides additional 15 seconds power during a power failure, allowing the device to relay back to the host the failure. This is Maintenance 4.0.

Rugged and flexible for advanced developments

SE5901B embeds high EMC protection, wide temperature operation, programming and installation flexibility in one device. SDK versions allow you to make use of the powerful hardware and develop your own applications on top of ATOP’s reliable APIs and with plenty of coding examples in ATOP’s SDK. SDK versions are available upon request. Please contact ATOP’s representative for additional information.

* test carried out with one VPN-IPsec Tunnel, Peer-to-Peer mode, Ethernet cable. Performance can change based on the Cellular Network.

SE5901B-4G-US	Industrial Serial-Cellular Gateway with 1 RS-232/485 Serial port, DB9(M), 4G connectivity (US)
SE5901B-4G-EU	Industrial Serial-Cellular Gateway with 1 RS-232/485 Serial port, DB9(M), 4G connectivity (EU)
SE5901B-IO-4G-US	Industrial Serial-Cellular Gateway with 1 RS-232/485 port and 1 RS-232, (TB14), 4G connectivity, 2 DI, 2 Relay outputs (US)
SE5901B-IO-4G-EU	Industrial Serial-Cellular Gateway with 1 RS-232/485 port and 1 RS-232, (TB14), 4G connectivity, 2 DI, 2 Relay outputs (EU)
SE5901B-IO-4G-GPS-US	Industrial Serial-Cellular Gateway with 1 RS-232/485 port and 1 RS-232, (TB14), 4G connectivity, 2 DI, 2 Relay outputs, GPS (US)
SE5901B-IO-4G-GPS-EU	Industrial Serial-Cellular Gateway with 1 RS-232/485 port and 1 RS-232, (TB14), 4G connectivity, 2 DI, 2 Relay outputs, GPS (EU)
SE5901B-IO-4G-B-US	Industrial Serial-Cellular Gateway with 1 RS-232/485 Serial, DB9(M), 4G connectivity, Addl. 15s. Power (US)
SE5901B-4G-B-EU	Industrial Serial-Cellular Gateway with 1 RS-232/485 Serial, DB9(M), 4G connectivity, Addl. 15s. Power (EU)
SE5901B-IO-4G-B-US	Industrial Serial-Cellular Gateway with 1 RS-232/485 port and 1 RS-232, (TB14), 4G connectivity, 2 DI, 2 Relay outputs, Addl. 15s power (US)
SE5901B-IO-4G-B-EU	Industrial Serial-Cellular Gateway with 1 RS-232/485 port and 1 RS-232, (TB14), 4G connectivity, 2 DI, 2 Relay outputs, Addl. 15s power (EU)
SE5901B-IO-4G-GPS-B-US	Industrial Serial-Cellular Gateway with 1 RS-232/485 port and 1 RS-232, (TB14), 4G connectivity, 2 DI, 2 Relay outputs, Addl. 15s power, GPS (US)
SE5901B-IO-4G-GPS-B-EU	Industrial Serial-Cellular Gateway with 1 RS-232/485 port and 1 RS-232, (TB14), 4G connectivity, 2 DI, 2 Relay outputs, Addl. 15s power, GPS (EU)
SE5901B-IO-4G-GPS-B-US (for Marine)	Industrial Serial-Cellular Gateway with 1 RS-232/485 port and 1 RS-232, (TB14), 4G connectivity, 2 DI, 2 Relays, Addl. 15s power, GPS, Marine certified
SE5901B-4G-B-US (for Marine)	Industrial Serial-Cellular Gateway with 1 RS-232/485 Serial, DB9(M), 4G connectivity, Addl. 15s. Power

Speed	IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT(X)
Connector ports	1x 10/100/1000BASE-TX RJ-45

Connector	14-Pin 5.08mm Terminal Block (integrated with DI/DOs) or D-Sub9 connector
Ports	1
Mode	1 port RS-232/485 (2-wire) software selectable
Baud Rate	1,200~921,600 bps
Parity	None, Odd, Even
Data Bits	7, 8 software selectable
Stop Bits	1, 2 software selectable

Supported GNSS	GPS, Glonass, Beidou
Connector	1x SMA

USB Ports	2
USB Speed	1 x USB 2.0 High Speed OTG; 1x USB power only
USB Connector	USB A Type
Digital Inputs (DI)	2 x channels photo coupler isolated digital input
Digital Outputs (DO)	2 x digital relay outputs. N.O.( 2A@24VDC)

Serial Server-related	VirtualCOM (Serial/IP), Virtual Server (port Forwarding)
Security	IPsec, PPTP or OpenVPN VPN tunneling. Max VPN throughput 37.9Mbps *; SMTP/TLS, Firewall, DMZ
Network	ARP, IPv4, DHCP Client, ICMP, TCP, UDP, HTTP, RFC2217,TELNET, NTP Client, NAT, Port Forwarding, ICMP Ping, DDNS
Management	Web, ATOP Device Management Utility, SNMPv1/v2c/v3, SMS
Configuration	Embedded Web-Server (Web UI), TELNET, Atop Device Management Utility

079 27702711

+91 9714854011

Model No : SE5901B

INTRODUCTION

Quick Links

About Pritech

Location Map

Contact

Input Voltage	9 - 48 VDC
Input Current (@ 9VDC)	0.6 A @ 12 VDC
Power Consumption	0.6A @ 12VDC (7.2 W Max)
Connector	3-Pin 5.08mm Lockable Terminal Block
Power Redundancy	USB DC 5V Power Input
Reverse Polarity Protection	Yes

Housing	IP30 protection, SPCC metal housing
Dimension (W x H x D)	32mm x 122mm x 92mm
Weight	400g
Installation	DIN-Rail , Wall mount (optional kit)
Reset Button	Yes

Operating Temperature	-40°C~70°C (-40°F~158°F)
Storage Temperature	-40°C~85°C (-40°F~185°F)
Ambient Relative Humidity	5%~95%, 55°C (Non-condensing)

Model No : SE5901B

INTRODUCTION

Request for Price