079 27702711

+91 9714854011

Product Catalogues

8-Port EN 50155 Certified Railway IP67 WATERPROOF MANAGED Layer-3 Gigabit PoE

8-Port EN 50155 Certified Railway IP67 WATERPROOF MANAGED Layer-3 Gigabit PoE SWITCH

Model No : EMG8608

Weight In KG :2

Weight In LB :4.40924

Description
Sepcification
Download
Buy

INTRODUCTION

ATOP’s EMG8608 IP67-rated Railway-compliant Ethernet switch is the best solution for providing high-speed Gigabit connectivity in bayside or carriage side Railway applications. Its rugged, aluminum enclosure can effectively protect the Switch core in any environment.
The 8-M12 Connectors Gigabit ports can supply up to 30W of PoE Power (802.3af or 802.3at) to your PoE device providing an overall maximum budget of 240W. This makes EMG8608 the ideal solution for on-board or off-board surveillance by simplifying the wiring where it’s difficult, risky and expensive to introduce new elements.
The embedded redundant-power supply input provides a reliable and failure-proof safety mechanism to minimize down-times. EMG8608 comes in either redundant Low-Voltage DC power input (12~57 VDC, 47~57 VDC for PoE models) or in redundant High-Voltage DC power input (50~145 VDC). Each power module, including a Relay-output alarm, uses a S-coding M12 connector that makes EMG8608 ideal and simple for engineers setting up a Fault-Alarm System.
Its IP67 housing protection, combined with a wide operating temperature of -40 to 75°C and wall mounting capacities make it suitable to most Railway applications in harsh environments or industrial filed applications.
To learn more about its application please download EMG8608 datasheet.

TECHNICAL
SWITCH PROPERTIES
Priority Queues
8
VLAN Table
4,096
MAC-Based VLAN
512
VLAN ID Range
VID 1 to 4,094
Trunk Group4
4
Static IGMP Groups
128
Dynamic IGMP Groups
256
MAC Table Size
16k
Packet Buffer Size
1.5 MB
Jumbo Frame
9216 Byte
ETHERNET

Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3ae For 10 Gigabit Ethernet Fiber
IEEE 802.3x for Flow Control, back pressure flow control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.1ae for MAC security (MACsec) – on RHG7X28-M4 & RHG7X28-M5
IEEE 802.3ad for Port Trunk with LACP
IEEE 802.3az for Energy Efficient Ethernet
Protocols
IPv4, IPv6, IGMPv1/v2/v3, IGMP Snooping,GARP,GMRP, GVRP, SNMPv1/v2c/
v3, SNMP Inform, ICMP, Telnet, SSH, DHCP Server/Relay/Client, DHCP Option
66/67/82, BootP, RARP, TFTP, NTP Server/Client, SNTP, SMTP, SMTP (Gmail),
RMON, HTTP, HTTPS, Syslog, MRP (Manager/ Client), LLDP, IEEE 1588 PTP
V1/V2, IEEE 1588 Hardware E2E Transparent Clock, 802.1x, EAP, RADIUS,
TACACS+, Mirror port, QoS, ACL, Serial Console, U-Ring, STP, RSTP, MSTP, Redundancy
Compatible Ring, DHCP Snooping, ARP Spoof Prevention, Dynamic
ARP Inspection, MLD, UDLD, IP Source Guard
Layer-3 Switching Protocols
Routing: IPv4 Unicast static routing, RIP v1/v2, OSPFv2,
Multicast: IGMPv1/v2/v3, DVMRP, PIM-DM, PIM-SM, PIM-SSM
Routing Redundancy: VRRP (Virtual Router Redundancy
Automation Profiles
Modbus/TCP status registers
SNMP MIB
MIB II, IF-MIB, SNMPv2 MIB, BRIDGE-MIB, RMON MIB Group 1,2,3,9, RFC
RFC 1157, RFC 1213, RFC 1215, RFC 1493, RFC 1643, RFC 1757, RFC 2011,
RFC 2012, RFC 2013, RFC 2233, RFC 2571, RFC 2742, RFC 2819, RFC 2863,
RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC
POWER
Input Voltage
50~145 VDC for High voltage product
12~57 VDC for Non-PoE models
45~57 VDC for 802.3af mode / 51~57 VDC for 802.3at
Input Current (System)
50 – 145 VDC, 0.27A max. , 13.5W (For High voltage Models)
12 – 57 VAC, 1.19A max. , 14.28W (For Non-PoE Models)
Input Current (with PoE, full loading)
45 – 57 VDC, 3.08A max. , 138.6W (PoE 802.3af Mode, 8-ports)
51 – 57 VDC, 5.03A max. , 256.53W (PoE 802.3at Mode. 8-ports)
Power Consumption (System)
Max 12.6 W @9 VDC (without PoE)
Max 130.5 W @45VDC (802.3af, with 15.4W PoE per port for 8 ports)
Max 255 W @51VDC (802.3at, with 30W PoE per port for 8 ports)
Power Input
2 x S-Coding M12 connectors (4 Pin)
Reverse Polarity Protection
Yes
INTERFACES

Ethernet Ports

8 x 10/100/1000BASE-T(X) auto negotiation speed –M12 connector

LED Indicators

PWR1, PWR2, Alarm, Ethernet Act/Link, SFP Link, PoE, Ring

Console

RS232 (A-coding M12 connector)

Relay Output

2 relay outputs with current carrying capacity of 1A @ 24 VDC (through A-coding M12 connector)

Fiber Optics Ports

2 x 1000Base-X SFP slots

PHYSICAL CHARACTERISTICS
Housing
IP67 protection according to EN 60529
Dimension (W x H x D)
216 x 232 x 72
Weight
2kg
Installation
Wall-mount (Optional Din-Rail Kit)
ENVIRONMENTAL LIMITS
Operating Temperature
-40°C~75°C (-40°F~167°F)
Storage Temperature
-40°C~85°C (-40°F~185°F)
Ambient Relative Humidity
5%~95%, 55°C (Non-condensing)

EMG8608-4PoE	8-Port EN 50155 Certified Railway IP67 WATERPROOF MANAGED Layer-3 Gigabit 4PoE SWITCH
EMG8608-8PoE	8-Port EN 50155 Certified Railway IP67 WATERPROOF MANAGED Layer-3 Gigabit 8PoE SWITCH
EMG8608-HV	8-Port EN 50155 Certified Railway IP67 WATERPROOF MANAGED Layer-3 Gigabit PoE SWITCH HV