ATOP's high-density RHG7628 Managed Rack-mount
switch will provide you the flexibility your application needs. You will be
able to choose among 8 different Layer-3 Routing Core versions (based on power
supply and uplink port configurations) and five different 4/8-Port modules and
customize your device in a very simple way.
Designed for PoE, in wide
temperature: RHG7628 supports up to 24 Gigabit ports in any 8 or 4-port
multiple configuration. Specifically designed for bringing power through
Ethernet cable virtually anywhere, a maximum output Power over Ethernet of 720W
over the 24 ports is allowed (PoE/PoE+ configuration - 802.3af/at).
Available in 3 power input
variants, it is EN 60950-1:2006 certified and designed to handle the harshest
environments. Its fanless design and EMC Level 3 protection guarantee
operations within -40 and +75°C, with 24 PoE ports running full power and makes
it suitable to be used for almost every application.
Powerul and
versatile:
RHG7628 supports IPv4 Static
Routing, RIPv1/v2, OSPFv2, IGMP, IGMP Snooping, PIM Dense Mode and Sparse Mode,
DVMRP and VRRP for Routing Redundancy. Then, it embeds all features of RHG7528
(layer-2 version), allowing (through ERPS) network self-recovery down to 20ms
on full load. Almost any redundant ring topology is supported, such as ITU-T
G.8032 RPS Ring, IEEE802.1D-2004 RSTP, STP, MSTP, MRP (Client), iA-Ring,
iA-Chain and many compatible rings. Endless additional features are provided.
Automation and IoT
ready:
conforming with Profinet CC-B
v2.33 makes RHG7628 the perfect candidate for being the backbone of your
Industrial automation network.
The RHG7628 Series is
fully EN50155-certified to ensure reliable performance under a
variety of power supply conditions, such as voltage variations, power
interruptions, and supply changeovers, and it complies with essential sections
of EN50121-4 for ground equipment.
Secure:
The first Industrial Managed Secure Switch!
Protect your LAN from Eavesdropping and impesronation through 802.1AE MACsec.
With no additional latency and 100% Gigabit Throughput guarantee, dedicated
modules can provide you the internal ultimate security solution.
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3ae For 10 Gigabit Ethernet Fiber
IEEE 802.3x for Flow Control, back pressure flow control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.1ae for MAC security (MACsec) – on RHG7X28-M4 & RHG7X28-M5
IEEE 802.3ad for Port Trunk with LACP
IEEE 802.3az for Energy Efficient Ethernet
DC version: redundant 48~57 VDC
AC version: single 110~220 VAC
Redundant AC version: dual 110~220 VAC
PoE
2 x 48-57 VDC (each power input max 360W)
Input Current (System)
CPU board AC/ redundant AC: 110-220 VAC, 0.58 A Max, 64W Max
CPU board redundand DC 48-57 VDC , 0.68A Max, 32.7W Max
802.3af PoE full loading: 45-57 VDC, 8.4A Max, 370W Max
802.3at PoE+ full loading: 51-57 VDC, 14.4A Max, 720W Max
Connectors
2 x Lockable 5-pin terminal blocks for PoE power input (all vers.)
2 x Lockable 3-pin terminal blocks for DC power input (DC vers.)
1-2 x AC power inlet (non-redundant / -R version)
Reverse Polarity Protection
Yes
PHYSICAL CHARACTERISTICS
Housing
IP30 SPCC metal housing
Dimension (W x H x D)
440 x 44 x 340 mm (not including screws and rack-mount kit)