Designed to be
adaptive, with unprecedented throughput:
Atop’s
EHG7612 Series offers several different making it a very flexible product
based on your specific needs for Layer-3 Switching. No matter if the version,
this device offers 4 x 1/10 Gigabit Ethernet SFP uplinks making it a
cost-effective, reliable industrial solution where high-throughput and
high-reliability is fundamental.
Layer-3 routing
support IPv4 static routing, RIP v1/v2 and OSPFv2.
Designed for PoE, in
wide temperature:
EHG7612 supports
up to 12 Gigabit ports in different configurations, either Copper, PoE or
Fiber, any 8-port multiple configuration. Specifically designed for bringing
power through Ethernet cable virtually anywhere, a maximum output
Power over Ethernet of 240W over a maximum of 8 PoE/PoE+ ports is allowed (802.3af/at).
Rugged,
Wide-Temperature, Well protected design:
EHG7612 is EN61000-6-2, EN61000-6-4, IEC/EN/UL62368-1:2014 and FCC certified
certified and is designed to withstand the harshest environments and the most
demanding EMC environment. Its fanless design and EMC Level 3 protection
guarantee reliable operations within -40 and +70°C, guaranteeing no
packet is lost with all ports running full power and makes it suitable to be
used for almost every application.
Powerul and
versatile:
With its high performance, it
provides network redundant self-recovery mechanism is less than 20ms on full
load that enables the user to build a reliable network through almost any
redundant ring topology. It supports ITU-T G.8032 ERPS Ring, IEEE802.1D-2004
RSTP, STP, MSTP, MRP (Manager/ Client), iA-Ring, iA-Chain and many compatible
rings protocols for network redundancy. With a Multifunctional web dashboard,
its offers intelligent features such as QoS, VLAN, IGMP, Port mirroring and
security.
Application-Specific:
NEMA TS-2 Certification makes EHG7612 family the
perfect choice for Smart City and Traffic Control applications.
TECHNICAL
SWITCH PROPERTIES
Priority Queues
8
VLAN Table
4,096
MAC-Based VLAN
512
VLAN ID Range
VID 1 to 4,094
Trunk Group
4
Static IGMP Groups
128
Dynamic IGMP Groups
256
MAC Table Size
16k
Packet Buffer Size
1.5 MB
Jumbo Frame
9216 Byte
ETHERNET
Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3ae For 10 Gigabit Ethernet Fiber
IEEE 802.3x for Flow Control, back pressure flow control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
IEEE 802.3az for Energy Efficient Ethernet
9-57 VDC for Non-PoE models
45-57 VDC for 802.3af mode
51-57 VDC for 802.3at mode
Input Current (System)
Max. 2.2 A @ 12 VDC (without PoE)
Max. 3.3 A @ 45 VDC (Support up to 8 ports at 15.4W per PoE port)
Max. 5.2 A @ 51 VDC (Support up to 8 ports at 30W per PoE port)
Power Consumption (System)
Max. 26.4 W @ 12 VDC (without PoE)
Max. 148.5 W @ 45 VDC (Support up to 8 ports at 15.4W per PoE port)
Max. 265.2 W @ 51 VDC (Support up to 8 ports at 30W per PoE port)
Connector
5-Pin 5.08mm Lockable Terminal Block
Reverse Polarity Protection
Yes
INTERFACES
RJ45 Ports
Up to 16 10/100/1000BASE-T(X) auto negotiation speed
Fiber Optics Ports
Up to 16 100/1000BASE-X SFP slot plus 4 1000BASE-X or 4 10G SFP slots