The Waterproof RJ45 Connector to 2x5 Shrouded Male Straight Pin Header provides IP68 rated dust and water protection in harsh environments. The connector features an RJ45 jack for CAT5e/6 cable connection, and a 2x5 Straight Shrouded Pin Header. It is shrouded to provide mechanical integrity, and mates with Hirose DF11-10DS or equivalent housing.
The case side connector mounts to a panel or enclosure, and pairs with the RJ45-5EWTP-CB Cable Gland for waterproof connection.
Female RJ45 pass-thru receptacle for use with an Ethernet patch cord.
Two-by-five pin structure.
Pitch: 2mm
Ideal for harsh industrial environments such as factory automation or outdoor installations where cable needs to be run from a dry location to a wet one.
Circular threaded coupling mounts case side to connect with cable side connector.
13/16” – 28 UN (Unified Screw Thread) threading.
O-rings provide IP68-rated water and dust protection.
Can be mounted to a maximum panel thickness of 4.0mm.
50 micron gold plated RJ45 contacts for corrosion resistance.
Number of positions: 10
Male shrouded pins require pairing with 2x5 female housing.
To achieve waterproof/IP68 protection, the outside RJ45 connection must be sealed with either a case side waterproof cap or a connected cable with waterproof cable gland.
Requires RJ45-5EWTP-CB for complete waterproof connection.
Use RJ45-5EWTP-CAPT or CAP-WTP-HD-CST to protect the connector when not in use.
TECHNICAL
Contact Resistance: ≤ 30mΩ
Insulation Resistance: ≥100MΩ
Mounting Panel Thickness: ≤ 4.0 mm
50 micron gold plated RJ45 contacts.
Waterproof rating: IP68
Regulatory approvals: RoHS
Dimensions
WxDxH in: 1.01x1.16x1.04 (25.6x29x26 mm)
Pitch: 2mm
Weight: 0.0236 lbs
Environmental
Operating temperature: -13 to 185°F (-25 to 85°C).