Weight In KG :0.004
Weight In LB :0.00882
4-Wire Inline Drop Wire Connector
INTRODUCTION
Inline Drop Wire Insulation Displacement Connectors (IDC) reliably connect four copper wires with a special wire displacement contact. Simply insert the wires into the clip and press down on it to connect the wires together. Compressing the connector displaces the insulation and sets the wire conductors with a cold solder equivalent connection in one swift motion. The grease filled contact area seals the contacts to protect them from moisture exposure.
Available in a variety of contact styles for splicing telecom/telephone wiring, tapping existing wiring, or joining wires of different wire gauges, these connectors provide a moisture resistant barrier for reliable connections. Inline drop wire splicing connectors are suitable for splicing different types of telephone drop wires.
TECHNICAL
Materials : Polycarbonate shell, Phosphor Bronze, with tin-plated conductors, ready for crimping.
Solid copper wire installation from 1.3-0.9mm (16-19 AWG)
Maximum Insulation O.D.: 3.18mm (0.125")
Environmental : Operating temperature: -22°F to 158°F (-30°C to 70°C).
Storage temperature: -22°F to 176°F (-30°C to 80°C).
Operating and Storage Relative Humidity: 0% to 95% non-condensing RH.
Configuration : 4-wire inline joins telephone wire using inline drop wire connector configurations.
